Product Information

No. A WinBalance hydraulic or mechanical lift base is 100% non-electric - no motor, no power cable, no battery, no control box. You adjust the height by hand and the patented buffer keeps every stroke smooth and quiet.No power requiredSilent, no motor humFree floor placementBecause nothing is powered, an electric point is never a constraint. That matters most for schools, clinics, libraries and elderly-care settings, where cable runs have to be safety-checked, and for meeting rooms and hotel rooms where furniture must be moved without re-wiring.It also removes the two things buyers complain about most on electric desks: motor hum during a meeting, and a dead desk when the actuator or control box fails. A hydraulic base keeps working for its whole service life with no electronics to replace.Want a quieter, low-maintenance alternative to an electric sit-stand desk? Ask us for samples and OEM/ODM options for your market.

Yes - a WinBalance hydraulic base is rigid enough to type, write and lean on. Stability comes from the frame, not from the motor: a double-column steel tube overlaps at every height, and a mechanical locking collar takes the load off the hydraulic seal once you stop.Double-column steelMechanical lock collarZero wobble at typing heightSingle-column telescopic legs flex under side load, which is what makes a desk feel shaky while you type. WinBalance doubles the column and machines the inner tube to a tight clearance, so lateral play is measured in tenths of a millimetre.The patented buffer also removes the bouncy "spring" feel that plain gas or spring lifts have at full extension. Load capacity is marked on each base and verified by load testing, so you can specify a model that stays solid with a monitor arm, a PC tower and a stack of files on top.Specifying for a project? Tell us your desk size, top weight and target heights and we will match the column diameter and load rating for you.

A WinBalance hydraulic lift table base is engineered and cycle-tested for 120,000 complete lift-and-lower strokes - roughly 30 years of normal daily use - and every base carries a 2-year warranty.120,000-cycle testedPatented buffered lift2-year warrantyThe part that fails first on most height-adjustable desks is the electric motor and its control box. A hydraulic or mechanical lift base removes both. WinBalance uses a sealed hydraulic cylinder with a patented buffer, so travel stays smooth at the top and bottom of every stroke instead of slamming into a hard stop.Every base is jig-welded, powder-coated and then cycle-tested before it leaves the line. Production runs under ISO 9001, and SGS inspection reports can be supplied with the order. Spare cylinders and complete replacement frames are available for long-term maintenance contracts.Buying for a school, clinic, bank or elderly-care facility? Long-life lift hardware means fewer service calls and a longer replacement cycle - ask us for a 5-year spares plan with your quotation.

We offer a wide range of commercial furniture, including lift bases that do not require electricity, cruciform bases, steel plate bases, fancy metal bases, lamps, metal tables and chairs for indoor and outdoor use.

Commercial grade furniture is designed for use in business and public environments, such as offices, hotels, restaurants, and schools. It is built to be more durable, safe, and functional than residential furniture to withstand heavy and frequent use. This type of furniture adheres to strict safety standards and often includes features tailored to specific commercial needs, such as non-electric lift table bases or easy-to-clean surfaces for dining tables.

WinBalance metal furniture typically exhibits strong durability and corrosion resistance, enabling it to withstand natural factors such as wind, rain, and sun exposure in outdoor environments, thus making it highly suitable for outdoor use. To ensure the long-term durability of metal furniture in outdoor settings, we employ the following crucial processes for corrosion and rust prevention:Surface Treatment : This is a crucial step in corrosion and rust prevention. Through grinding, polishing, and other operations, we remove impurities and uneven surfaces from the metal, providing a solid foundation for the adhesion of subsequent coatings.Hot-dip Galvanizing Process : Metal components are immersed in molten zinc, resulting in a firmly adhered zinc layer on the metal surface. This zinc layer forms a protective barrier against corrosion, effectively resisting the erosion of natural elements and extending the lifespan of metal furniture.Electrostatic Powder Coating Technology : This technique allows powder paint to be evenly applied to the metal surface. The resulting coating is not only sturdy and aesthetically pleasing but also further enhances the corrosion resistance of metal furniture and elevates its visual appeal.By combining these three processes, we significantly enhance the corrosion and rust resistance of outdoor metal furniture, ensuring its durability in harsh natural environments. Thanks to our factory's high-quality production capabilities, WinBalance metal furniture is an ideal choice for outdoor settings, and you can confidently select and use it for your outdoor restaurant table bases and hotel furniture needs.

  We welcome custom sample requests for new metal table base designs.  Of course! Our company has been committed to providing exceptional products that exceed expectations to meet your specific needs. Here are more ways for us to customize your furniture:  Size and shape:Customers can customize the size of the table and chair according to specific uses and space constraints.Provide customized shapes, such as rectangular, circular, elliptical, etc., to meet different design requirements.  Material selection:Provide customers with different types of metal materials for selection, such as steel, aluminum, stainless steel, etc.Consider the quality, durability, and appearance of the material.  Color and surface treatment:Let customers choose the color of the table and chair (black, gray, navy blue, burgundy, white, green, purple) to match their home style.Different surface treatment methods can be selected to improve the anti-corrosion performance. They can be divided into outdoor and indoor categories:Outdoors:① The first layer is electrophoresis, the second layer is spraying ordinary powder; ②the first layer is spraying zinc powder, the second layer is spraying ordinary powder; ③special outdoor powder;Indoor: spray a layer of ordinary powder.  Functional requirements:Lift table bases are designed to meet the height requirements of users, ensuring comfort and ease of use.  Design style:Provide a variety of design styles based on customer preferences and space styles, such as modern, industrial, classical, etc.Special patterns or decorative elements can be customized to make the tables and chairs more personalized.  Customized Logo and Brand Identity:Allowing customers to add customized logos, brand logos, or text to their tables and chairs, making the products more personalized.Provide different marking methods, such as engraving, printing, etc.  By working closely with you, we can create customized furniture that exceeds your expectations and adds the perfect touch to your personal style. Let's create something truly special together!